Detailed Product Description

Vertical Hydraulic Double-cylinder Pre-Heater for road marking

1.Engine :18Hp water-cooled or wind-cooled electric -startup diesel engine ,
low noise and environmental protection, has the indication of water
temperature .voltage and engine oil ,whose max rotating speed is 2200r/min.
2.Stirring :Diesel drives  stirrer to run through gear pump ,dual control
valve ,overflow valve and hydraulic motor.
3.Hydraulic tank: Tank is designed with windows, hot-spreading slice and
indication of oil temperature with 68# hydraulic oil . The cubage: 50L inside.
4.Heating system: A petroleum liquefied gas tank is used to respectively
supply gas to furnace chamber and outside sparker lighter .The furnace is the
imported four-circuit furnace ,which equips with low temperature combustion
system which makes the liquefied gas burned more fully and economically .The
connection pipes are seamless steel pipes and rubber pipes with heat and
pressure resistance ,and the heater adopts electric spark or burning torch to
start .The heating temperature can be freely adjusted in the scope of 0-300?
according to the different kinds of coating chosen by users .
5.Melting pot :The arc punching bottom pot which is made of special steel with
anti - scorching ,high temperature and oxidation resistance ,and the vertical
vane type multi - hydraulic stirrer makes more paint to melt with better
quality .Cubage:2*350Kg.
6.Thermometer :The imported heating oil conduction sensing thermometer with
high temperature and shock resistance makes the temperature sensing more
accurate. and easier to be observed.
7.Operation control :The manual dual control valves respectively control two
stirrer  in the two cylinders to do positive and negative agitation. The
patent anti-malicious and non-standard operating system can better protect the
machine from damage.
8.Warmer system the high-tech packed :Heat reservation materials ,and  multi
warmer system make the time of warm longer and the efficiency higher .(can
save 30Tfuel compared with common pre-heater)
9.Ventilating system : Four dumping chimneys at the top of pre-heater  fully
discharge the smoke in the chamber.
10.Feeding port: The intermeshing and close feeder system  makes the on-off
more safety ,accurate and convenient.
11.Structure :Integral welding structure design with high strength and high
temperature resistance .The overall plate is  made of cold rolling high
strength steel with oxidation and high temperature resistance, whose surface
has been sprayed paint with abrasion resistance and high temperature
resistance. The pedal plate is made of anti -skid steel sheet
12.Safety device : Equip with automatic protective device when overload which
can automatically breaks away in emergency and the flame-out device, which
ensures the safety of the operator and equipments.
13.Size .Weight :1840mm (length )*1530mm (width)*1720mm (height ).850kg.
Remarks:The appearances of TT-RFS400,TT-RFS1000,TT-RFS1200 double-cylinder pre-
heater are the  same as that of  TT-RFS700 pre-heater , but the technical
indices of capacity and work efficiency are different, the detail technical
parameters of capacity and work efficiency are abridged.