Detailed Product Description

1. Engine: Japanese original imported Honda 3.0Hp gasoline engine .
2. Driving system: Original imported various speed transmission (HTS) with
automatic brake device, which can be operated forward, back off and stop very
convenient.
3. Driving speed:  Forward 0-4km/h; back off 0-4km/h.
4. Max climbing capacity:15°
5. Operation and Directional: Walk forward, which gets over the disadvantages
that must walk back off, and makess sure the marking quality. Lock of
directional device, which gets over the inconvenient of turning with common
pedestrian road marking machine, makes sure the marking machine in straight or
turning freely, the marking construction easy and fast, the marking quality
and efficiency higher.
6. Guide rod: Adjustable up, down, left and right chromeplated device, guide
line very freely during construction.
7. Marking speed: 6-8m/min, which is two times faster than common pedestrian
machine.
8. Capacity of paint tank: 75kg
9. Marking width: 350/400/450/500mm(optional and can be made according to the
special needs of the customer).
10. Marking bucket: Integrative marking bucket and paint tank hang inside of
chassis. The knife underframe is made of imported heat resistance, abrasion
resistance and oxidation resistance alloy steel and adopts double-closed
scrapted structure , which make marking head orderlier; the sieve in the paint
tank effectively removes impurity in paint.
11. Heating system:15kg petroleum liquefied gas tank supplies gas to the
frontal, back nozzle and ignitor, the power controlled by different valves
respectively. The valves and nozzles are all used imported parts, and  the
connecting pipes are imported heat resistance rubber pipe.
12. Glass beads container: The gears mesh automatically, the dispensing gear
rolls definitely. The automatic clutch device synchronous with screeding
bucket. The container has a widow from which you can check the quantity of
glass beads in time. Capacity: 30kg.
13. Chassis: Firm welding frame, the surface has been galvanized, chrome-
plated or high temperature treatment. The back wheel is made of heat
resistance (350), abrasion resistance modified rubber, which can effectively
prevent tackless or deformation after long time of high temperature work. The
diameter is 250mm. The wheel nave is made of refined steel equips with high
speed imported bearing, which makes the whole machine lighter and more
convenient.
14. Handle: Individual design conforms to the requirements of human body
project. The operation way can adjust according to the needs of the operator.
15. Marking bucket, floor knife: Imported hard tungsten steel knife-head, high
viscidity and abrasion resistance, which makes the line edge facile and
straight.
16. Brake device:Convenient foot brake system makes the machine in safety
condition in any time.
17. Size .Weight: 1480mm(length )*1170(1220/1270)mm(width)*1150mm
(height).181kg/193/209(excluding of the gas container).