Detailed Product Description

1. Engine: Original imported Japanese Robin 6.0hp four-stroke air-cooled
gasoline engine .
2.Chassis :Firm welding frame ,whose surface has been settled by chrome-plated
or painting treatment ,fix with high speed imported bearing ,to make the whole
machine more lightness.
3. Rubber wheel :Left and right tyres are all gas filled vacuum
wheels ,diameter 350mm .Front guide tyre is special abrasion resistance
modified rubber tyre with the diameter 190mm.
4 .Front tyre guide arm:  Lock the front tyre direction device ,which  makes
sure the marking machine walking in straight line or turning freely.
5.Guide rod :Up, down ,left ,right freely adjustable .
6.Paint pump :Single new type hydraulic piston high pressure airless pump runs
stably, which is suitable for cold plastic road marking paint .Big flow,
stable  pressure. Max pressure 20mpa(working pressure 10-15mpa),max flow
9L/min.
7.Paint tank (optional):The capacity 80Kg.Fix with sieve inside ,and with
filter at feeding port fix .
8.Spray gun :Double new type manual spray guns ,fix with hard side columnar
reverse wastewater nozzles, to make the site discharge fast and easy .Non-arc
nozzle makes the line straight .Manual brake controller makes the change
between single and double flexible.
9 .Spraying width :100-450mm.
10 .Size . Weight :1500 mm(length)*720 mm(width)* 1040 mm(height)* 121kg
(not including of coating tank ).
Optional for operator sitting chair XT-II to realize self-propelled .
B type equipped with air-compressor, glass beads pressurized storage, glass
beads spray gun ,glass beads spray control system and stainless spray system
to meet the needs of water paint construction.
Except all the functions of B type ,C type equips with a micro-electric
control system, which consists of Micro-electric controller, on-off
coder ,electromagnet, special gun bracket and so on. This system can be set
four kinds of marking way according to the national road marking standard ,and
realized fully automatic control.