Detailed Product Description

1.Engine?Original imported Honda or Robin 20Hp air-cooled gasoline engine.
2.Driving system:The orginal imported variable speed transmission systemwith
 automatic brake device,which can be freely operated to forward,back off or stop
(HTS);The left and right wheels with differential driving device make the curve
driving and turning flexible and convenient.The manual brake system makes the
running safer.
3.Driving speed :Forward:0-22km/m;back off :0-3km/h.
4.Max climbing capability: 15°.
5.Micro-electronic control system:This system has four-type marking ways(also
can makes personality design according to the standard of customer).Spray gun
controller can freely change the guns between the single and double spray guns.
6.Chassis:Firm welding frame,and surface has been chrome-plated ,galvanizated
or sprayed coaating with corrosion resistance,equip with high speed type
imported bearing to ensure the whole machine lighter and more convenient.
7.Rubber wheel :The left,right ,front and back wheels are gas-filled pressure
resistance vacuum ones,the diameter is ?400mm.
8.Guide rod:The guide rod is easy to operate,which can be freely adjusted to
up,down,left and right.
9.Illumination and alarming function:install with high intensity illumination
lamp,which makes the work at night convenient.the alarming lamp with adjustable
flicker frequency greatly improves the safety of work at night .
10.Paint pump:Equip with single hydraulic piston high pressure airless
pump,which makes sure the big flow and stable pressure .Max pressure 20Mpa
(Working pressure 10-15Mpa).Max flow:20L/min.
11.Paint tank:The capacity is 65L.There is sieve in the tank.
12.Spray gun:Equip with three new type pneumatic spray guns and one hand spray
gun with lengthening pipe for spraying special sign like arrow and letter.Hard
side columnar reverse wastewater nozzle (30/20)makes the on-spot discharging
easy and convenient.The non-arc nozzle ensures the base line collimated.
13.Available paint:for the spraying of cold solvent,water based road marking paint.
14.Spraying width:100-450mm.
15.Glass beads Sprayer: The parameters are the same as that of TT-DRZ-I.
16.Glass beads bin:Bin with windows can check the quantity of the glass beads
in time.The capacity is 25kg.
17.It can finish the pre-marking synchronous with marking line,which improve
efficiency double times.
18.Total Size:Weight: 1880 mm?Length??740 mm?width??1650 mm?Height?.
564kg.
Note:option for special trailer chassis,convenience for transportation.
Option for portable hand-push road marking machine to mark special marking,such
 as pedestrain,parking and lane marking.